End Face Drilling Four Station Automatic Balancing Machines

Chat Now
Product Details

1.Automatic loading and unloading of the assembly line

2.12 inch human-machine interface

3.Six-axis linkage, simultaneous processing

4.Short product replacement time

5.Soft-bearing balance measurement system

6.Widely used in balance measurement and correction of water pumps and other products which need remove weight on end  face, can be connected to rotor production line to achieve automatic production


End Face Drilling Four Station Automatic Balancing Machines

Technical data at a glanceA4WZ1
Max Weight of Workpiece (kg)1.6
Max Diameter of Workpiece (mm)30-130
Journal Diameter (mm)φ5-16
Balancing Speed (r/min),≤2500
Balancing Motor Power (kw)0.4 KW Servo Motor
 Min Achievable Residual Unbalance Amount (g.mm/kg) ≤0.3
Testing Time (second)5-9
Reduction Rate of Unbalance≥90%
Working Pressure (MPa)0.4-0.6
Operating Voltage (V)AC: 380V external
Milling ModeDrilling
Take Time (second)12-15 Drilling once on the left and right side
Drilling Power (kw)0.75
Average Machine Consumption(l/min)50
Balancing Machine TypeSoft Bearing Measuring Bracket
Machine Total Power (kw)9.5
ProtectionPhase Sequence Protection, Overload Protection, Air Pressure Monitoring